Setting Water Softening; Water Softener Salt - Bosch SMV6YCX00E User Manual

NLSoftening system
Water hardness
°dH
0 - 6
7-8
9 - 10
11 - 12
13 - 16
17 - 21
22 - 30
31 - 50
Remark:Set the appliance to the
determined water hardness.
→ "Set water softening", page
24
With a water hardness of 0 - 6 °dH,
you do not need to use softening salt
for dishwashers and you can switch
off the water softening.
→ "Switch off water softening",
page 25

10.2 Setting water softening

Set the device to the water hardness.
Determine the water hardness and
1.
the desired setpoint.
→ "Overview of the water
hardness settings", page 23
Press.
2.
Approx. up for 3 seconds
3.
to access basic settings.
aThe display shows Hxx. a
appears on the display
to give.
Just as often
4.
the desired water hardness is set.
The factory setting is H04.
To save the settings, press for
5.
approx. 3 seconds
24
Hardness range
soft
soft
average
average
average
hard
hard
hard
Busy-
displayed
press until
to press.
mmol/l
0 - 1.1
1.2 - 1.4
1.5-1.8
1.9-2.1
2.2 - 2.9
3.0 - 3.7
3.8 - 5.4
5.5-8.9

10.3 Water softener salt

You can soften the water with
softening salt.
Fill softener salt
If the refill salt indicator lights up, refill
the salt in the salt reservoir
immediately before the program
starts. The consumption of softening
salt depends on the water hardness.
The higher the water hardness level,
the higher the consumption of
softening salt.
NB!
Dishwasher detergent can damage the
water softener.
Only fill the water softener tank with
▶
softening salt for dishwashers. The
rinse aid container can be corroded
by softening salt for dishwashers.
To ensure that spilled softener salt
▶
is rinsed out of the rinse aid
container, the softener salt must be
filled into the softener salt
container immediately before the
program starts.
Set value
H00
H01
H02
H03
H04
H05
H06
H07