Table of Contents
Advertisement
Overflowing rinse aid can lead to
excessive foaming during the wash
cycle.
Close the lid of the rinse aid
4.
reservoir.
aThe lid clicks audibly into place.
11.2 Setting the amount of
rinse aid
If streaks or water stains remain on
the dishes, adjust the amount of rinse
aid.
Press.
1.
Approx. up for 3 seconds
2.
to access basic settings.
aThe display shows Hxx. a
appears on the display
to give.
Just as often
3.
until the display shows the factory
set value r05.
Just as often
4.
the desired amount of rinse aid is
set.
– At a low setting, less rinse aid is
added during the wash cycle,
which reduces streaks on the
dishes.
– At a higher setting, more rinse
aid is added during the wash
cycle, reducing water stains and
improving drying results.
To save the settings, press for
5.
approx. 3 seconds
11.3 Switching off the rinse aid
system
If the rinse aid refill indicator bothers
you, e.g. if you use a combined
detergent with rinse aid
Busy-
displayed
to press
press until
to press.
rinse aid component, you can switch
off the rinse aid system.
Tip:The function of the rinse aid is
limited in combined detergents. You
will usually achieve better results by
using rinse aid.
Press.
1.
Approx. up for 3 seconds
2.
to access basic settings.
aThe display shows Hxx. a
appears on the display
to give.
Just as often
3.
until the display shows the factory
set value r05.
Just as often
4.
the display indicates r00.
To save the settings, press for
5.
approx. 3 seconds
aThe rinse aid system is deactivated
switched on and the rinse aid refill
indicator is deactivated.
12 Detergent
12.1 Suitable dishwasher
detergents
Only use detergents that are suitable
for dishwashers. Suitable for both
non-combined and combined
detergents.
For optimal washing and drying
results, use a non-combined
detergent in combination with
separate water softener salt
→ Page 24 and rinse aid
→ Page 26 .
Dishwasher detergentNL
Busy-
displayed
to press
press until
to press.
27
Advertisement
Table of Contents
