Table of Contents
Advertisement
15 Basic settings
You can set the basic settings of your device according to your wishes.
15.1 Overview of the basic settings
The basic settings depend on the equipment of your device.
Basic setting
Water hardness
Rinse aid
del dosage
Intensive drying
Hot water
Factory setting (may differ depending on device type)
1
display
Choice
text
H04
H00 - H07
1
r05
r00 - r06
1
d00
d00 - d01
1
A00
A00 - A01
1
Basic settingsNL
Description
Set the water softener to
the water hardness.
→ "Set water softening",
page 24
At position H00 the water
softening is switched off.
Set amount of rinse aid.
Switch off the final rinse
system with position r00.
During the final rinse, the
temperature is increased,
resulting in better drying
results. The duration may
therefore increase slightly.
Remark:Not suitable for
sensitive dishes.
Activate intensive drying
"d01" or deactivate "d00".
Set cold water connection or
hot water connection. Only
set the device to DHW if the
hot water is prepared
energetically favorably and a
suitable installation is
available, e.g. a solar boiler
with circulation line. The
water temperature must be a
minimum of 40 °C and a
maximum of 60 °C.
Turn on hot water
"A01" or disable "A00".
35
Advertisement
Table of Contents
