Table of Contents
Advertisement
To use the foldable plate supports
2.
again, fold them up.
aThe foldable plate supports
click audibly into place.
8.5 Cutlery tray
Arrange the cutlery in the cutlery drawer.
Place the cutlery with the pointed
and sharp side down.
9 Before first use
9.1 Commissioning for the first
time
When using the device for the first
time or resetting it to factory
settings, you must make settings.
Tip:Connect your device to a mobile
end device. You can easily make all
settings via the Home Connect app.
10.1 Overview of the water hardness settings
Here you will find an overview
You can determine the
water hardness with a w
ight of the adjustable water hardness values. obtain this
from your local water supply company or water hardness
tester.
Required:The device is set up and
connected. → Page 12
Fill with softening salt.
1.
→ Page 24
Fill with rinse aid.
2.
→ Page 26
Switch on device.
3.
→ Page 32
Set water softening.
4.
→ Page 24
Set amount of rinse aid. → Page 27
5.
Fill the detergent
6.
→ Page 27 .
Start the program with the highest
7.
cleaning temperature without
dishes.
We recommend that you use the
appliance without dishes before
using it for the first time due to
possible water stains and other
residues.
Tip:You can change these settings
and other basic settings → Page 35
change at any time.
10 Softening system
Hard, calcareous water leaves
limescale residues on the dishes and
the rinse aid container and can clog
parts of the appliance. For good
dishwashing results, you can soften
water with the water softener and
softener salt. To prevent damage to
the appliance, water with a hardness
of more than 7 °dH must be softened.
usageNL
23
Advertisement
Table of Contents
