Generic Terms And Abbreviations - Mitsubishi Electric A1SD75P1-S3 User Manual

Generic Terms and Abbreviations

Unless specially noted, the following generic terms and abbreviations are used in this
manual.
Generic term/abbreviation
PLC CPU
AD75
Peripheral device
AD75 software package
Drive unit
Manual pulse generator
Data link system
Network system
I/F
17-segment LED
DOS/V personal computer IBM PC/AT
Personal computer
Workpiece
Axis 1, axis 2, axis 3
1-axis, 2-axis, 3-axis
Artisan Technology Group - Quality Instrumentation ... Guaranteed | (888) 88-SOURCE | www.artisantg.com
Generic term for PLC CPU on which AD75 can be mounted.
Generic term for positioning module AD75P1-S3, AD75P2-S3, AD75P3-S3, A1SD75P1-S3,
A1SD75P2-S3, and A1SD75P3-S3.
The module type is described to indicate a specific module.
Generic term for DOS/V personal computer that can run the following "AD75 Software
Package".
Generic term for "SW1IVD-AD75P type positioning module software package" and "GX
Configurator-AP Version 1 (SW0D5C-AD75P-E)."
Abbreviation for pulse input compatible drive unit (servo amplifier, stepping motor).
Abbreviation for manual pulse generator (prepared by user).
Abbreviation for MELSECNET (II) and MELSECNET/B data link system.
Abbreviation for MELSECNET/10 network system.
Abbreviation for interface.
17-segment display mounted on upper front of AD75.
R and compatible DOS/V compliant personal computer.
Generic term for DOS/V personal computer.
Generic term for moving body such as workpiece and tool, and for various control targets.
Indicates each axis connected to AD75.
Indicates the number of axes. (Example: 2-axis = Indicates two axes such as axis 1 and axis 2,
axis 2 and axis 3, and axis 3 and axis 1.)
Details of generic term/abbreviation
A - 16