Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Creating Mobile Internet WAN Connection
If the PIN code check is enabled for the SIM card inserted into your USB modem, for correct
operation of the mobile WAN connection click the ENTER PIN button in the notification in the top
right corner of the page and enter the PIN code
creation page, in the General Settings section, select the relevant value from the Connection
type drop-down list and specify the needed values.
Figure 87. The page for creating a new Mobile Internet connection. The General Settings section.
Parameter
Connection name
Enable connection
Use as interface
10 Some models of USB modems do not support disabling the PIN code check on the SIM card through the web-based
interface of the router.
10
in the window displayed. Then on the connection
General Settings
A name for the connection for easier identification.
Move the switch to the right to enable the connection.
Move the switch to the left to disable the connection.
Move the switch to the right in order to create a network interface
for this connection, for example, to combine several interfaces into
a transparent connection.
Page 110 of 352
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
