Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Parameter
BSSID
Max associated clients
Enable shaping
Broadcast wireless
network
The unique identifier for this wireless network. You cannot change
the value of this parameter, it is determined in the device's internal
settings. The field is displayed in the settings of the existing wireless
network.
The maximum number of devices connected to the wireless network.
When the value 0 is specified, the device does not limit the number
of connected clients.
Move the switch to the right to limit the maximum bandwidth of the
wireless network. In the Shaping field displayed, specify the
maximum value of speed (Mbps).
Move the switch to the left not to limit the maximum bandwidth.
If the wireless network broadcasting is disabled, devices cannot
connect to the wireless network. Upon that DVG-5402G/GF can
connect to another access point as a wireless client.
To enable/disable broadcasting on a schedule, click the Set
schedule icon (
). In the opened window, from the Rule drop-
down list, select the Create rule value to create a new schedule
(see the Schedule section, page 324) or select the Select an
existing one value to use the existing one. Existing schedules are
displayed in the Rule name drop-down list.
To enable broadcasting at the time specified in the schedule and
disable it at the other time, select the Enable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button. When the wireless connection is disabled, the device
will not be able to enable broadcasting of this wireless network on
schedule.
To disable broadcasting at the time specified in the schedule and
enable it at the other time, select the Disable wireless network
broadcasting value from the Action drop-down list and click the
SAVE button.
To change or delete the schedule, click the Edit schedule icon
(
). In the opened window, change the parameters and click the
SAVE button or click the DELETE FROM SCHEDULE button.
If you created an additional network, you can configure, change or
delete a schedule for each network. To do this, click the icon in the
line of the network.
Page 171 of 352
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
