Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
LED
Internet
LAN 1-4
WLAN 2.4G
WLAN 5G
WPS
USB
FXS 1-2
In case the Power, Internet, WPS, USB, and FXS 1-2 LEDs are blinking green at the same time,
the device is in the emergency mode. Power the device off and on. If the device is loaded in the
emergency mode again, restore the factory default settings via the hardware RESET button.
Mode
The default WAN connection is on.
Solid green
No light
A device is connected to the port of the router (for the
LAN port configured as the WAN port: the router is
Solid green
connected to an Ethernet line).
Data transfer through the relevant LAN port.
Blinking green
The cable is not connected to the relevant port.
No light
The router's WLAN of the relevant band is on.
Solid green
Data transfer through the Wi-Fi network of the relevant
Blinking green
band.
The router's WLAN of the relevant band is off.
No light
Attempting to add a wireless device via the WPS
Blinking green
function.
The WPS function is not in use.
No light
A USB device is connected to the router's USB port.
Solid green
No USB device.
No light
The line is registered on the SIP server.
Solid green
Attempting to register on the SIP server.
Slow blinking green
The receiver is off-hook, an incoming call, or talking.
Fast blinking green
The line is not registered on the SIP server, because
registration is disabled or the corresponding connection
No light
is off.
Page 18 of 352
Description
The default WAN connection is off, or
•
there are no WAN connections created, or
•
the device is configured as an access point or
•
repeater.
Overview
Advertisement
Table of Contents
