Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Parameter
Enable
The maximum number
of attempts
Timeout
Connection restart
Addresses
Modem IP address
verification
When all needed settings are configured, click the APPLY button.
Health Check
Move the switch to the right to check the connection health using
the ICMP ping mechanism.
A number of requests to check the health of the connection. By
default, the value 10 is specified.
Several ping requests are sent to check the hosts. After several
failed attempts the connection status is changed until a successful
attempt is made.
A time period (in seconds) allocated for a respond to one ping
request. By default, the value 3 is specified.
Move the switch to the right to reestablish connection if the
maximum number of ping requests fails.
IP addresses from the external network that the router will check for
availability via ICMP ping mechanism. By default, the router
checks the IP address 8.8.8.8.
Click the ADD button, and in the line displayed, enter an IP address
or leave value suggested by the router. You can add several
addresses.
To remove an IP address from the list, click the Delete button
(
) in the line of the address.
Move the switch to the right to let the router request the actual IP
address from the modem in case modem's IP address changes before
expiration of the previous one.
Page 115 of 352
Configuring via Web-based Interface
Description
Advertisement
Table of Contents
