Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
When the WPA-PSK, WPA2-PSK, WPA-PSK/WPA2-PSK mixed, WPA3-SAE, and WPA2-
PSK/WPA3-SAE mixed authentication type is selected, the following fields are displayed:
Parameter
Password PSK
Encryption type
When you have configured the parameters, click the APPLY button.
When connecting to a wireless access point, the wireless channel of DVG-5402G/GF will switch to
the channel of the access point to which you have connected.
In addition, the Connection Information section in which you can view the connection status
and the network basic parameters is displayed.
If you want to connect to the WISP network, after configuring the device as a client, you need to
create a WAN connection with relevant parameters for the WiFiClient_2GHz interface in the
2.4GHz band or for the WiFiClient_5GHz interface in the 5GHz band.
A password for WPA encryption. Click the Show icon (
display the entered key.
An encryption method: TKIP, AES, or TKIP+AES.
TKIP and TKIP+AES encryption types are not available for
WPA3-SAE and WPA2-PSK/WPA3-SAE mixed authentication
types.
Page 188 of 352
Configuring via Web-based Interface
Description
) to
Advertisement
Table of Contents
