Table of Contents
Advertisement
DVG-5402G/GF Wireless AC1200 Wave 2 MU-MIMO Dual
Band Gigabit Router with Fiber WAN Port, 3G/LTE Support,
2 FXS Ports, and USB Port
User Manual
Parameter
Start IP
End IP
SELECT ADDRESS
RANGE
Lease time
DNS relay
External DHCP server IP
Option 82 Circuit ID
Option 82 Remote ID
Option 82 Subscriber ID
When all needed settings are configured, click the APPLY button.
In the DHCP Options section, you can change default values for some options of DHCP protocol
(IP address, subnet mask, DNS servers) or specify additional parameters which the built-in DHCP
server should send to clients to configure the local network.
Figure 100. Configuring the local interface. The IPv4 tab. The section for configuring DHCP options.
The start IP address of the address range used by the DHCP server to
distribute IP addresses to clients.
The end IP address of the address range used by the DHCP server to
distribute IP addresses to clients.
Use the button to set one of the available IP address ranges. In the
window displayed, select the needed range and click the SAVE
button to automatically fill in the Start IP and End IP fields.
The lifetime of IP addresses leased by the DHCP server. At the end
of this period the leased IP address is revoked and can be distributed
to another device, unless the previous device has confirmed the need
to keep the address.
Move the switch to the right so that the devices connected to the
router obtain the address of the router as the DNS server address.
Move the switch to the left so that the devices connected to the
router obtain the address transmitted by the ISP or specified on the
Advanced / DNS page as the DNS server address.
The IPv4 address of the external DHCP server which assigns IPv4
addresses to the router's clients.
To specify several IPv4 addresses, click the ADD button, and in the
line displayed, enter an IPv4 address.
To remove the IPv4 address, click the Delete button (
line of the address.
The value of the relevant field of DHCP option 82. Do not fill in the
fields unless your ISP or the administrator of the external DHCP
server provided these values.
Page 128 of 352
Configuring via Web-based Interface
Description
) in the
Advertisement
Table of Contents
