Creating Wan Connection - D-Link DSL-2750U User Manual

DSL-2750U Wireless N300 ASDL2+ Router with Ethernet WAN Support
User Manual

Creating WAN Connection

You should configure your WAN connection in accordance with data provided by your
!
Internet service provider (ISP). Make sure that you have obtained all necessary information
prior to configuring your connection. Otherwise contact your ISP.
1. On the Internet connection type page, from the Connection type list, select the
connection type used by your ISP and fill in the fields displayed on the page.
2. Specify the settings necessary for the connection of the selected type.
3. For the Ethernet (LAN) mode: If your ISP uses MAC address binding, select the Clone
MAC address of your device checkbox.
4. For the Ethernet (LAN) mode: If the Internet access is provided via a VLAN channel,
select the Use VLAN checkbox and fill in the VLAN ID field.
5. For the ADSL mode: Specify the VPI and VCI values in the relevant fields.
6. Click the NEXT button to continue or click the BACK button to return to the previous page.
Page 37 of 173
Configuring via Web-based Interface