Table of Contents
Advertisement
Recall Memory
In Home menu, press Memories button. Navigate with
knob to desired memory to load and push Knob button.
An icon with slot number will appear on the top right.
Figure 26
When scrolling through memories slot, border of current
memory slot currently selected is displayed in green.
Otherwise, border will be red.
Memory currently
used
Figure 27
When a memory is used, user can also Unselect memory.
This action is necessary when Limit & Lockout are set on
memory slot and user needs full control. See Limits &
Lockouts section.
Figure 28
English
Erase Memories
Memories can be erased. Select "System Options",
"Memories management" and finally "Edit memories".
Select the memories you want to erase and push knob
button.
Export / Import memories
To export on USB key memories, plug USB key, then
selection USB key in System Options menu. Finally select
"Backup all settings & memories".
To load from USB key memories previously saved, select
Load Only Memories.
Memories and PIN settings
When a supervisor code is created, memories can be
locked. See dedicated section Limits & Lockouts.
7
Figure 29
Figure 30
English
Advertisement
Table of Contents
