Lincoln Electric Global UI Manual page 4

Pulse Mode activation:
Figure 9
When TIG pulse is activated, three new icons appear to
configure frequency, duty cycle and background current.
Main Secondary
Icon Icon
Trigger Mode:
According to Trigger mode selection, dedicated icon will
be displayed in "Status Bar".
Figure 10
Use knob to go to "Trigger mode" icon and push knob
button to enter in "Trigger mode" menu selection.
English
Description
Pulse mode activation or
deactivation.
Pulse frequency.
Configure the Background
current which is a percentage
of Welding current.
Pulse duty cycle.
Main Secondary
Icon Icon
For more details about Trigger sequence, see dedicated
section in TIG Trigger Sequences chapter.
Remote Control:
When remote control is activated, dedicated icon is
displayed in "Status Bar".
Use knob to go to "Remote Control" icon and push knob
button to enter in Remote Control menu selection.
3
Figure 11
Description
Trigger torch operating mode
in 2 Step.
Trigger torch operating mode
in 4 Step.
Trigger torch operating mode
in 2 Step with Restart.
Trigger torch operating mode
in 4 Step with Restart.
Trigger torch operating mode
in 4 Step Bi-Level.
Secondary icon allows to set
the Background current
value.
Trigger torch operating mode
in Spot.
Secondary icon allows to set
the Spot time.
Trigger torch operating mode
in Tack For Thin.
Secondary icon allows to set
the Tack time.
Figure 12
English