Lincoln Electric Global UI Manual page 5

Figure 13
Main Secondary
Icon Icon
Hand Remote:

Accessible with Manual remote control and torch with
potentiometer.
User configure the current value only with potentiometer.
Knob on UI has no effect on welding current configuration.
Current range value is defined in secondary icon. In
example below the current range will be from 15A to
270A.
Figure 14
In order to change range value, push knob button and
configure lower and upper limits of current range.
English
Description
When a remote control is
selected (excepted Up
Down).
Secondary icon allows
configure current range.
&
to
Foot pedal:

Accessible only with Foot remote control.
User configure the minimum current when pedal is barely
press and the maximum current when the pedal is fully
pressed.
The current value display on Home menu correspond to
current according to pedal position.
Torch potentiometer:

Accessible only with Torch potentiometer.
Works like Foot remote control but foot effect is done with
torch potentiometer.
UP-DOWN torch:

Usable only with UP&Down torch.
During welding pushing UP button will smoothly increase
the current value and pushing DOWN button will smoothly
decrease the current value.
4
Figure 15
Figure 16
English