Lincoln Electric Global UI Manual page 15

When OFF is selected, cooler is not used.
When ON is selected, cooler will be always activated.
In Automatic mode, cooler will be activated when trigger is
pressed and will be shut down few minutes after trigger
released.
In ON and Automatic, an icon is displayed on Home menu
to indicate Cooler is activated.
Figure 53
Memories Management
See dedicated sections Memories page 6 and Limits &
Lockouts.
VRD
VRD (Voltage Reduction Device) feature is only available
when SMAW process is selected.
When VRD is activated, an auxiliary power source with
low voltage is used to arc strike.
Figure 54
When activated, a new icon on top right will indicate that
output voltage is reduced.
Figure 55
English
Customers support
In this section, user will find all information of our
accessories catalog.
Advanced Settings
Here below is the Advanced Settings tree.
Manage PIN settings
PIN settings allow to create a supervisor code which
allows to limit and restrict parameters modification.
Supervisor is defined by a unique PIN code number.
If a supervisor PIN code exists, PIN code will be asked to
enter in Manage PIN Settings menu.
To create a supervisor code (if it does not already exist),
select Create PIN and enter PIN supervisor code number.
If supervisor PIN code exists Create PIN line is not
selectable.
14
Figure 56
Figure 57
English