Lincoln Electric FLUX-CORED FUME GUN K289 Operator's Manual
Lincoln Electric FLUX-CORED FUME GUN K289 Operator's Manual

Lincoln Electric FLUX-CORED FUME GUN K289 Operator's Manual

Flux-cored fume gun

Advertisement

Quick Links

RETURN TO MAIN MENU
IM549
K289 Flux-Cored Fume Gun
October, 2004
Safety Depends on You
Lincoln arc welding and cutting
equipment is designed and built
with safety in mind. However, your
overall safety can be increased by
proper installation ... and thought-
ful operation on your part. DO
NOT INSTALL, OPERATE OR
REPAIR THIS EQUIPMENT
WITHOUT
READING
THIS
MANUAL AND THE SAFETY
PRECAUTIONS CONTAINED
THROUGHOUT. And, most
importantly, think before you act
and be careful.
OPERATOR'S MANUAL
Copyright © 2004 Lincoln Global Inc.
• World's Leader in Welding and Cutting Products •
• Sales and Service through Subsidiaries and Distributors Worldwide •
Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com

Advertisement

Table of Contents
loading

Summary of Contents for Lincoln Electric FLUX-CORED FUME GUN K289

  • Page 1 RETURN TO MAIN MENU IM549 K289 Flux-Cored Fume Gun October, 2004 Safety Depends on You Lincoln arc welding and cutting equipment is designed and built with safety in mind. However, your overall safety can be increased by proper installation ... and thought- ful operation on your part.
  • Page 2: Electric And Magnetic Fields

    351040, Miami, Florida 33135 or CSA Standard W117.2-1974. A Free copy of “Arc Welding Safety” booklet E205 is available from the Lincoln Electric Company, 22801 St. Clair Avenue, Cleveland, Ohio 44117-1199. BE SURE THAT ALL INSTALLATION, OPERATION, MAINTENANCE AND REPAIR PROCEDURES ARE PERFORMED ONLY BY QUALIFIED INDIVIDUALS.
  • Page 3: Fumes And Gases

    ELECTRIC SHOCK can kill. 3.a. The electrode and work (or ground) circuits are electrically “hot” when the welder is on. Do not touch these “hot” parts with your bare skin or wet clothing. Wear dry, hole-free gloves to insulate hands.
  • Page 4 WELDING SPARKS can cause fire or explosion. 6.a. Remove fire hazards from the welding area. If this is not possible, cover them to prevent the welding sparks from starting a fire. Remember that welding sparks and hot materials from welding can easily go through small cracks and openings to adjacent areas.
  • Page 5 PRÉCAUTIONS DE SÛRETÉ Pour votre propre protection lire et observer toutes les instruc- tions et les précautions de sûreté specifiques qui parraissent dans ce manuel aussi bien que les précautions de sûreté générales suivantes: Sûreté Pour Soudage A L’Arc 1. Protegez-vous contre la secousse électrique: a.
  • Page 6 The code number is especially important when identifying the correct replacement parts. - Register your machine with Lincoln Electric either via fax or over the Internet. • For faxing: Complete the form on the back of the warranty statement included in the literature packet accompanying this machine and fax the form per the instructions printed on it.
  • Page 7: Installation

    DESCRIPTION The K289 is a Flux-Cored Fume Gun rated 500 amperes 60% duty cycle. It was developed to remove smoke emitted at the arc when welding with Innershield electrodes. .068"(1.7mm), .072(1.8mm), 3/32"(2.4mm), 7/64”(2.8mm) and .120”(3.1mm) elec- trode at 3/4"(19.1mm) to 1-1/4"(31.8mm), 1- 1/2"(38.1mm), 2-3/4"(69.9mm) and 3-3/4"(95.3mm) Contact Tip to Work Distance(CTWD).
  • Page 8: Maintenance

    MAINTENANCE To ensure proper smoke pickup and gun life, the intake ports and end of extension guide must be kept Maintenance Recommended Clean intake ports and I.D. of extension guide with wire. Remove spat- ter from bottom of exten- sion guide. With vacuum off, remove extension guide and clean I.D.
  • Page 9 NOTES FLUX CORED FUME GUN...
  • Page 10 ● WARNING ● Spanish ● AVISO DE PRECAUCION ● French ● ATTENTION ● ● German WARNUNG ● Portuguese ● ATENÇÃO ● Japanese Chinese Korean Arabic ● ● ● ● ● ● ● ● ● ●...
  • Page 11 ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● ● Spanish ● PRECAUCION French ● ATTENTION ● German Portuguese ● ● Japanese Chinese Korean Arabic WARNING AVISO DE WARNUNG ATENÇÃO...
  • Page 12 • World's Leader in Welding and Cutting Products • • Sales and Service through Subsidiaries and Distributors Worldwide • Cleveland, Ohio 44117-1199 U.S.A. TEL: 216.481.8100 FAX: 216.486.1751 WEB SITE: www.lincolnelectric.com...

This manual is also suitable for:

K289

Table of Contents