Table of Contents
Advertisement
Figure 48
WARNING
Do not switch power source off during software update.
After software installation and it is requested, power
source must be restarted.
Weld Mode Setup
See Guided Setup subchapter.
Dual Procedure
WARNING
This mode in only available when Weld Mode Setup is in
Manual
Dual Procedure allows user to quickly change between
two
power
sources
process
Procedure is very similar to Memory recall with quick
access.
One configuration is saved in quick memory A and the
other configuration is saved in B quick memory B.
In order to activate Dual Procedure.
Figure 49
When activated, two new icons will be display in Home
Menu according to quick memory A or B selected.
English
configurations.
Dual
13
Figure 50
To alternate between A and B, user has to access to new
icon in Secondary Settings.
Figure 51
Main
Icon
Push knob button to alternate between A and
B procedures.
Cooler Mode
Figure 52
Description
English
Advertisement
Table of Contents
