Safety Switch-Off - Miele KM 7404 FX Operating And Installation Instructions

Familiarising yourself with the appliance

Safety switch-off

Sensors are covered
Your cooktop will switch off
automatically if one or several of the
sensors remain covered for longer than
10 seconds, for example, by finger
contact, food boiling over or by an
object such as an oven glove or a tea
towel.  will appear in the timer display
for a few seconds. If the  sensor is
affected,  will light up until the object
or soiling has been removed.
 will go out once you have removed
the object or cleaned the cooktop and
the cooktop will be ready to use again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator
appears. If you switch the cooking zone
on and off again, it is ready for
operation again.
You can adust the safety switch-off
function by changing the safety setting
(see "Adjusting settings").
30
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Power level
range").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0** 1
10:00 8:00 5:00
10:00 7:00 4:00
5:00 4:00 3:00
5:00 3:30 2:00
4:00 2:00 1:30
4:00 1:30 1:00
4:00 1:00 00:30
4:00 00:42 00:24
4:00 00:30 00:20
4:00 00:30 00:18
1:00 00:24 00:10
2