Safety Switch-Off - Miele KM 7678-2 FL Operating And Installation Instructions

Safety features

Safety switch-off

Sensor controls are covered
Your cooktop will switch off
automatically if one or several of the
sensors remain covered for longer than
10 seconds, for example, by finger
contact, food boiling over or by an
object such as an oven glove or tea
towel.  flashes briefly above the
 sensor control and a tone will sound.
 will go out once you have removed
the object and/or cleaned the cooktop
and the cooktop will be ready to use
again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if an area is
heated for an unusually long period of
time. This time depends on the power
level selected. If it has been exceeded,
the heat switches off and the residual
heat indicator will appear. A power level
can be selected in the usual way.
The cooktop is programmed to safety
setting 0 at the factory. If required, you
can set a higher safety setting with a
shorter maximum operating time (see
chart).
44
Power level*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
* The power levels with a dot after the
number are only available if the power level
range has been extended (see "Power level
range").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0** 1
10:00 8:00
10:00 7:00
5:00 4:00
5:00 3:30
4:00 2:00
4:00 1:30
4:00 1:00 00:30
4:00 00:42 00:24
4:00 00:30 00:20
4:00 00:30 00:18
1:00 00:24 00:10
2
5:00
4:00
3:00
2:00
1:30
1:00