Safety Switch-Off - Miele KM 6629 Operating And Installation Instructions

Safety features

Safety switch-off

Sensor controls are covered
Your cooktop will switch off
automatically if one or several of the
sensors remain covered for longer than
10 seconds, for example, by finger
contact, food boiling over or by an
object such as an oven glove or tea
towel.  flashes briefly above the
 sensor control and a tone will sound.
 will go out once you have removed
the object and/or cleaned the cooktop
and the cooktop will be ready to use
again.
Excessive operating time
The safety switch-off mechanism is
triggered automatically if a cooking
zone is heated for an unusually long
period of time. This time depends on
the power level selected. If it has been
exceeded, the cooking zone switches
off and the residual heat indicator
appears. If you switch the cooking zone
on and off again, it is ready for
operation again.
The appliance is programmed to
safety setting 0 at the factory. If
necessary, a higher safety setting with
a shorter maximum operating time can
be set (see chart).
44
Power setting*
1
1.
2/2.
3/3.
4/4.
5/5.
6/6.
7/7.
8
8.
9
 ,, 

* The power levels with a dot after the
number are only available if the power level
range has been increased (see
"Programming").
** Factory default setting
Maximum operating time
[h:min]
Safety setting
0** 1
10:00 8:00
10:00 7:00
5:00 4:00
5:00 3:30
4:00 2:00
4:00 1:30
4:00 1:00
4:00 0:42
4:00 0:30
4:00 0:30
1:00 0:24
4:00 0:42
4:00 0:42
2
5:00
4:00
3:00
2:00
1:30
1:00
0:30
0:24
0:20
0:18
0:10
0:24
0:24