Miele KM 7404 FX Operating And Installation Instructions page 60

Problem solving guide
Problem
 flashes alternately
with  in the timer
display.
 flashes alternately
with ,  or  in
the timer display.
A message not listed in
this table is appearing
in the timer display.
60
Possible cause and remedy
The overheating protection mechanism has been
activated.
 Allow the cooktop to cool down.
 Remove the cause of the overheating (see
"Familiarising yourself with the appliance -
Overheating protection").
 Check that the cooktop works.
 If this fault code continues to appear in the
display, contact Miele.
The fan is blocked or defective.
 Make sure the fan has not been blocked by an
object.
 Remove the obstruction.
 If this fault code continues to appear in the
display, contact Miele.
There is an electronic unit fault.
 Interrupt the power supply to the cooktop for
approx. 1 minute.
 If the problem persists after power is restored,
please contact Miele.