Functions; Con@Ctivity 3.0; Permanent Pan Recognition; Pan And Pan Size Recognition - Miele KM 7404 FX Operating And Installation Instructions

Familiarising yourself with the appliance

Functions

Con@ctivity 3.0
Con@ctivity is the direct communication
system between an electric Miele
cooktop and a Miele rangehood.
Communication is achieved via
networking. Con@ctivity 3.0 enables the
rangehood to operate automatically
depending on the operational state of
your Miele cooktop.
Further information can be found in the
operating and installation instructions of
your rangehood.

Permanent pan recognition

When you place a pan on a cooking
zone, the numerical display of the
cooking zone activates automatically.

Pan and pan size recognition

The pan and its size are detected within
the cooking zone. The energy given off
is adjusted according to the pan size.

PowerFlex cooking area

A PowerFlex cooking area joins
together 2 PowerFlex cooking zones,
This enables a larger item of cookware
to be used.
The PowerFlex cooking zones combine
automatically to form a PowerFlex
cooking area when you place a
sufficiently large pot or pan on them
(see "Familiarising yourself with the
appliance – Cooking zone data"). The
PowerFlex cooking zones can also be
switched on manually.
28

Booster

When activated, the power is boosted
so that large quantities can be heated
up quickly, e.g. when boiling water for
cooking pasta.
Stop & Go
When Stop & Go is activated, the power
of all cooking zones in use is reduced to
power level 1. When Stop & Go is
deactivated, the cooking zones will
operate at the power level previously
selected.
Useful tip: Use this function when the
sensors need to be cleaned quickly, or
when there is a risk of boiling over.

Extended power levels

You can switch on additional levels
between the power levels. These
intermediate power levels enable you to
make finer adjustments to the power
output for the pot or pan being used.

Auto heat-up

When Auto heat-up has been activated,
the cooking zone switches on
automatically at the highest setting and
then switches to the continued cooking
setting which you have previously
selected.