Connecting via WPS
- A home Wi-Fi network is available.
- A sufficient signal strength is
available for your Wi-Fi network
where the cooktop is installed.
- There is no direct Wi-Fi connection
between the cooktop and a Miele
rangehood (Con@ctivity 3.0).
- You must have a WPS (Wi-Fi
protected setup) compatible
router.
Commissioning
Switch the cooktop on.
Touch the 0 and 6 sensors at the
same time for 6 seconds.
The seconds can be seen counting
down in the timer display. When this
time has elapsed, a progress light will
appear during the connection attempt
(for max. 120 seconds).
The WPS login is only active during
these 120 seconds.
Activate the WPS function on your
router.
If the connection was successful, the
code : appears in the timer display.
If the connection could not be
established, the timer display will show
the code :. You have probably not
activated WPS on your router quickly
enough. Repeat the steps above.
Install the Miele App.
Follow the instructions in the App.
You can use all Miele@home functions.
Useful tip: If your Wi-Fi router does not
support WPS, please connect via the
Miele App.
35