Advertisement
4. Insert the plate into the buckle until
it clicks.
5. The belt should fit the pelvis as low
as possible.
6. The belt should not touch the neck,
jaw, or face and it should pass over
the shoulder.
Seat belt indicator light (rear seat)
(green)
The light turns on when the rear seat
belt is fastened while the vehicle
power is switched ON, and it turns off
after a certain period.
Equipment to Protect Occupants/Pedestrians
Unfastening a Seat Belt
Make sure that the seat belt is not
twisted, then let the seat belt retract
slowly.
Adjusting the Seat Belt Height
If the seat belt contacts your neck or it
slips off the shoulder, adjust the seat
belt height.
To raise the seat belt
To lower the seat belt
1. Hold the seat belt anchor adjuster
and press the knob down.
Seat Belts
3-29
Advertisement
