Advertisement
How to Use the Wireless
Charger (Qi)
1. Start the engine.
The power for the Wireless Charger
(Qi) turns on and the LED indicator
turns on.
2. Place a device compliant with the
Qi Wireless Charging standard
(portable device with a maximum
power consumption of 5 W or 15
W or below) in the center of the
charging area on the tray.
1. Charging area
2. LED indicator
The LED indicator turns on in amber
or green when charging starts.
Charging starts when all the doors
and liftgate are closed.
For details on the LED indicator, refer
to the following LED indicator table.
Charging status display
The charging status of the Wireless
Charger (Qi) can be checked with the
LED indicator or the icon displayed on
the center display.
Illumina-
Icon indi-
tion/flash
cation
pattern
Does not
―
turn on
Status
Indicates that charg-
ing is turned off.
Wireless Charger (Qi)
Illumina-
Icon indi-
tion/flash
cation
pattern
Turns on in
white
Turns on in
amber
Turns on in
green
Flashes in
white
Flashes in red
Turns on in
red
*
1 Some mobile devices can switch
between normal charging and fast
charging.
NOTE
Charging efficiency may be reduced
or charging may not be possible
depending on the use environment
and conditions.
Other Equipment
Status
Indicates that charg-
ing is possible.
Indicates normal
charging.
Indicates fast charg-
*1
ing
.
Indicates that the
charging conditions
are not met.
Indicates that charg-
ing is not possible
because a high tem-
perature is detected.
Indicates that charg-
ing is not possible
because foreign mat-
ter is detected.
Indicates that there
is a problem with
Wireless Charger
(Qi) and it needs to
be repaired. Consult
an Authorized Maz-
da Dealer.
7-41
Advertisement
