Download Print this page

Mazda 3 2004 Owner's Manual page 306

Hide thumbs Also See for 3 2004:

Advertisement

Instrument cluster
1. "BRAKE!"
Active driving display
1. "BRAKE!"
NOTE
If any of the following conditions is
met, the forward detection function
may not operate normally.
The Forward Sensing Camera (FSC)
cannot detect target objects.
Refer to Forward Sensing Camera
(FSC) on page 5-108.
The front radar sensor cannot
detect target objects.
Refer to Radar Sensors on page
5-112.
When there is the possibility of a
partial contact with a target object.
The driver deliberately performs
driving operations (accelerator pedal
operation, steering wheel operation,
selector lever/shift lever operation,
and turn signal lever operation).
If any of the following conditions is
met, the forward detection function
may operate.
An animal or object on the road is
detected.
Smart Brake Support (SBS)
Passing an approaching vehicle
while rounding a curve.
Vehicle is passing through a narrow
gate or a gate with a low ceiling.
There is a metal object, bump, or a
protruding object on the road.
(Vehicles with Driver Monitoring
(DM))
If the system determines that the
driver is not paying attention to the
road, it activates the collision
warning earlier than normal.
(Automatic transmission vehicle)
If the forward detection function
performs brake control and the
vehicle is stopped, the system will
continue to hold the brakes for a
brief time unless there is an
operation performed by the driver.
(Manual transmission vehicle)
When the forward detection
function performs brake control
and the vehicle is stopped, the
brakes are automatically released
after about 2 seconds if the driver
does not depress the brake pedal.
When the forward detection
function performs brake control
and the vehicle is stopped, the
engine stops if the driver does not
depress the clutch pedal.
The operation distance and volume
of the collision warning can be
changed.
Refer to the Settings section in the
Mazda Connect Owner's Manual.
When the rearward detection
function operates
The rearward detection function
operates when all of the following
conditions are met.
The vehicle speed is about 2 km/h
to 15 km/h (2 mph to 9.3 mph).
*Some models.
Driving
*
5-175

Advertisement

loading

This manual is also suitable for:

Cx-30 2024