Advertisement
The air to the floor is warmer than air
to the face (except when the
temperature control dial is set at the
extreme hot or cold position).
Ventilation
1. Start the engine.
2.
3. Set the air intake selector to the
outside air position (indicator light
turns off).
4. Set the temperature control dial to
the desired position.
5. Set the fan control dial to the
desired speed.
Windshield Defrosting and Defogging
1. Start the engine.
2.
3. Set the temperature control dial to
the desired position.
4. Set the fan control dial to the
desired speed.
5. If dehumidified heating is desired,
turn on the air conditioner.
Equipment to Make Cabin More Comfortable
Manual Climate Control System
WARNING
Do not defog the windshield using the
switch with the temperature
control set to the cold position:
Using the
temperature control set to the cold
position is dangerous as it will cause
the outside of the windshield to fog
up. Your vision will be hampered,
which could lead to a serious accident.
Set the temperature control to the hot
or warm position when using the
switch.
NOTE
Fogging on the windows clears up
more easily while the air conditioner
is on, but they will fog up more easily
if the air conditioner is turned off.
Be careful that the windows do not
fog up when doing any of the
following:
Switching to recirculate mode
Turning off the air conditioner
For maximum defrosting, turn on the
air conditioner, set the temperature
control dial to the extreme hot
position, and turn the fan control
dial fully clockwise.
If warm air is desired at the floor,
press the
With the
position is automatically selected to
defrost the windshield. The air intake
selector cannot be changed to the
recirculated air position.
Dehumidifying
Operate the air conditioner in cool or
cold weather to help defog the
windshield and side windows.
1. Start the engine.
switch with the
switch.
switch, the outside air
6-17
Advertisement
