Advertisement
Equipment to Protect Occupants/Pedestrians
Seat Belts
CAUTION
Belt retraction may become difficult if
the belts and rings are soiled, so try to
keep them clean. For more details
about cleaning the seat belts, refer to
"Seat Belt Maintenance" (page
9-54).
1. Ring
3-28
How to Use the Seat Belts
Fastening a Seat Belt
Before fastening a rear seat belt, make
sure that the seat belt passes through
the seat belt guide correctly and it is
not twisted.
1. Sit back in the seat with your back
upright.
2. Hold the plate and slowly pull out
the seat belt.
NOTE
If the belt is locked and cannot be
pulled out, retract the belt once,
and then try pulling it out slowly. If
this fails, pull the seat belt strongly
one time and loosen it, then pull it
out again slowly.
3. Make sure that the belt is not
twisted.
Advertisement
