Advertisement
Driving
Mazda Radar Cruise Control (MRCC)
If the vehicle power is switched OFF while the distance between vehicles control is
disabled, the distance between vehicles control is enabled automatically the next
time the vehicle power is switched ON.
(Automatic transmission vehicle)
If the vehicle ahead stops during headway control, your vehicle in headway control
also stops. When the vehicle is stopped, the MRCC indicator light
instrument cluster turns on.
When the vehicle ahead accelerates from a stop and one of the following operations
is performed, your vehicle starts driving.
Press the RES switch.
Depress the accelerator pedal.
If you do not start driving the vehicle after the vehicle ahead has resumed driving,
the system urges the driver to resume driving.
NOTE
If the vehicle ahead resumes driving within 3 seconds after the vehicle was
stopped by the system, your vehicle also resumes driving automatically.
If the vehicle is stopped by the system continuously for 10 minutes or longer, the
parking brake is applied automatically. At this time, the MRCC is canceled.
Even if the MRCC is canceled while the vehicle is stopped, the vehicle is held in its
stopped position.
Refer to AUTOHOLD on page 5-63.
If the MRCC is canceled while the vehicle is stopped and there is no vehicle
ahead, you cannot resume driving the vehicle using the RES switch. Depress the
accelerator pedal and start driving the vehicle.
If the i-stop operation conditions are met while the vehicle is stopped, the i-stop
function operates without depressing the brake pedal. The engine restarts
automatically when you start driving the vehicle.
Refer to i-stop on page 5-21.
(Manual transmission vehicle)
The shift-up or shift-down request display might be displayed while the MRCC is
operating. When this occurs, shift gears because the gear position is not
appropriate.
NOTE
The MRCC may be canceled automatically if the shift up/shift down is not done
even when the shift up/shift down request display is indicated. In addition, the
engine may be damaged or the engine may stall.
Changing the set vehicle speed
Changing the set vehicle speed using the RES switch
Press the RES switch up (SET+) or down (SET-) to the desired speed.
5-150
in the
Advertisement
