Advertisement
Driving
Dynamic Stability Control (DSC)
How to Use the Dynamic
Stability Control (DSC)
Drive the vehicle at a speed of about
20 km/h (13 mph) or faster.
The DSC is operable.
When the DSC operates, the TCS/DSC
operation indicator light
Stopping the Traction Control System
(TCS)/DSC Operation
The TCS/DSC operation is canceled
and the DSC OFF indicator light
the instrument cluster and the DSC
OFF switch indicator light turn on.
Press the DSC OFF switch again to
enable the TCS/DSC operation.
NOTE
If the engine is stopped while the
TCS/DSC operation is canceled, the
TCS/DSC becomes operational
when the engine is started the next
time.
When the TCS/DSC is on and you
attempt to free the vehicle from
being stuck, the TCS/DSC will
activate. Depressing the accelerator
will not increase engine power and
freeing the vehicle from being stuck
might be difficult. When this
happens, turn off the TCS/DSC.
5-88
flashes.
in
If the TCS/DSC is canceled and the
following systems are operated, the
TCS/DSC becomes operational.
Smart Brake Support (SBS)
Mazda Radar Cruise Control
(MRCC)
Cruising & Traffic Support (CTS)
If the DSC OFF switch is pressed and
held for 10 seconds or longer, the
TCS/DSC operation can no longer
be turned off even if the DSC OFF
switch is pressed. In this case, the
DSC OFF switch will operate
normally when the vehicle power is
switched ON again after being
switched OFF.
Advertisement
