Table of Contents
Advertisement
CAUTION: Do not operate the server for long periods with the access panel open or removed. Operating the server
in this manner results in improper airflow and improper cooling that can lead to thermal damage.
5.
If installed, remove the butterfly riser cage (Removing a butterfly PCIe riser cage).
6.
Remove the primary PCIe riser cage (Removing a primary PCIe riser cage).
7.
Remove the air baffle (Removing the air baffle).
8.
If installed, do one of the following:
•
Remove the processor mezzanine tray (Removing and replacing the processor mezzanine tray).
•
Remove the CPU Mezzanine UPI performance kit (Removing and replacing a CPU Mezzanine UPI performance kit
board).
9.
Remove the fan cage (Removing and replacing the fan cage).
10. To remove or reroute cables, remove the fan cage holders (Removing and replacing the fan cage holders).
11. Disconnect the cables from the universal media bay.
12. Remove the universal media bay (Removing and replacing a universal media bay).
13. Do one of the following:
Remove the NVMe drives from the 2SFF drive bay (Removing and replacing an NVMe drive).
•
Remove the SAS/SATA drives from the 2SFF drive bay (Removing and replacing a hot-plug SAS or SATA drive).
•
14. Remove the drive cage.
To replace the component, reverse the removal procedure.
Removal and replacement procedures
67
Advertisement
Table of Contents
