Table of Contents
Advertisement
Item
LED
SAS/SATA drive components and LEDs
Item
Description
1
Locate
2
Activity ring LED
3
Do not remove LED
4
Drive status LED
Status
Definition
Flashing green
The drive ejection request is pending.
Off
The drive has been ejected.
Status
•
Solid blue = The drive is being identified by a host
application.
•
Flashing blue = The drive carrier firmware is being updated
or requires an update.
•
Rotating green = Drive activity.
•
Off = No drive activity.
•
Solid white = Do not remove the drive. Removing the drive
causes one or more of the logical drives to fail.
•
Off = Removing the drive does not cause a logical drive to
fail.
•
Solid green = The drive is a member of one or more logical
drives.
•
Flashing green = The drive is rebuilding or performing a
RAID migration, strip size migration, capacity expansion, or
logical drive extension, or is erasing.
•
Flashing amber/green = The drive is a member of one or
more logical drives and predicts the drive will fail.
•
Flashing amber = The drive is not configured and predicts
the drive will fail.
•
Solid amber = The drive has failed.
•
Off = The drive is not configured by a RAID controller.
Component identification
119
Advertisement
Table of Contents
