Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 7 in
5. Remove the
coin-cell
battery.
6. Remove the
memory
modules.
7. Remove the
wireless
card.
8. Remove the
heat
sink.
9. Remove the fan.
10. Remove the
system
board.
Procedure
1. Remove the screw (M2x3) that secures the power-adapter port to the palm-rest assembly.
2. Note the power-adapter port cable routing and remove the cable from its routing guides.
3. Lift the power-adapter port off the palm-rest assembly.
58
Removing the power-adapter port
Removing the power-adapter port
computer. After working inside your computer, follow the instructions in
"Removing the optical
"Removing the base
drive".
cover".
37
After
www.dell.com/
Advertisement
Table of Contents
