Table of Contents
Advertisement
NOTE:
Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in
Before working inside your
working inside your
computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•
Prerequisites
•
Procedure
Prerequisites
NOTE:
These instructions are applicable only for laptops with a non-touchscreen display.
1. Remove the battery.
2. Follow the procedure from step 1 to step 3 in
3. Remove the keyboard.
4. Follow the procedure from step 1 to step 7 in
5. Remove the
wireless
card.
6. Remove the
display
assembly.
7. Remove the
display
bezel.
8. Remove the
display
panel.
Procedure
1. Remove the six screws (M2.5x2.5 big head) that secure the display hinges to the display back-cover and antenna assembly.
2. Carefully lift the display hinges off the display back-cover and antenna assembly.
Removing the display hinges
computer. After working inside your computer, follow the instructions in
"Removing the optical
"Removing the base
cover".
drive".
Removing the display hinges
47
After
www.dell.com/
73
Advertisement
Table of Contents
