Dell Inspiron 15-3573 Service Manual page 86

Table 4. System setup options—Advanced menu
Advanced
Virtualization
USB Emulation
USB Wake Support
SATA Operation
Adapter Warnings
Function Key Behavior
Battery Health
Intel (R) Software Guard Extensions
Intel SGX Enable
Enclave Memory Size
PRMRR Size
BIOS Recovery from Hard Drive
BIOS Auto-Recovery
BIOS Recovery Optimization
Always Perform Intefrity Check
SupportAssist System Resolution
86 System setup
Allows you to enable or disable the Intel Virtualization
technology.
Default: Enabled
Allows you to enable or disable the USB emulation feature.
This feature defines how the BIOS, in the absence of a
USB-aware operating system, handles USB devices. USB
emulation is always enabled during POST.
NOTE: You cannot boot any type of USB device (floppy,
hard drive, or memory key) when this option is off.
Default: Enabled
Allows you to enable USB devices to wake the computer
from standby or to disable the USB wake support feature.
NOTE: If USB PowerShare is enabled, a device
connected to the USB PowerShare connector may not
wake the computer.
Default: Disabled
Allows you to configure the operating mode of the integrated
SATA hard drive controller.
Default: AHCI
Allows you to choose if the computer should display warning
messages when you use AC adapters that are not supported
by your computer.
Default: Enabled
Allows you to set function key or multimedia key as the
default function key behavior.
Default: Multimedia key
Displays the battery health.
Enable or disable Intel Software Guard Extensions.
Set the Intel Software Guard Extensions Enclave Reserve
Memory Size.
Set the PRMRR size.
Enable the user to recover from certain corrupted BIOS
conditions from a recovery file on the user primary hard
drive.
Default: Enabled
BIOS auto-recovery automatically recovers BIOS without
user actions.
Default: Disabled
Allows you to enable or disable the BIOS recovery
optimization.
Default: Enabled