Chapter 24: Replacing The I/O Board; Procedure; Post-Requisites - Dell Inspiron 15-3573 Service Manual

NOTE: Before working inside your computer, read the safety information that shipped with your computer and follow
the steps in Before working inside your
working inside your computer. For more safety best practices, see the Regulatory Compliance home page at
regulatory_compliance.
Topics:
•

Procedure

•

Post-requisites

Procedure
1. Using the alignment posts, place the I/O board on the palm-rest assembly and snap the I/O board into place.
2. Slide the I/O-board cable into its connector on the I/O board and close the latch to secure the cable.
3. Replace the screw (M2x3) that secures the I/O board to the palm-rest assembly.
Post-requisites
1. Follow the procedure from step 2 to step 8 in
2. Replace the keyboard.
3. Follow the procedure from step 4 to step 5 in
4. Replace the battery.
Replacing the I/O board
computer. After working inside your computer, follow the instructions in
"Replacing the base cover".
"Replacing the optical drive".
Replacing the I/O board
24
After
www.dell.com/
41