Analog Video Connection; Hdmi Out Connection - Raymarine AXIOM 2 PRO Installation Instructions Manual

14.1 Analog video connection

Analog video feeds from sources such as a Thermal camera or Security
camera can be connected to your display by connecting the device to the
BNC connector on the display's power/video/audio cable. The video feed
can be viewed using the Video app.
Note:
The connected video is encoded as RTSP and streamed over ethernet to
networked displays.
1. Display's PWR/Video/Audio connector.
2. Power/Video/Audio cable (supplied with your display).
3. Analog video device.
4. Analog video BNC connector.
For installation details, refer to the documentation provided with your analog
video device.
Note:
• Axiom® 2 Pro displays are supplied with a Power/video/audio cable that
has a straight connector. A right angled connector cable is also available
(part number: A80745 ).
• The original Axiom® Power/Video/NMEA 0183 cables cannot be used
with Axiom® 2 Pro displays.
Video connections

14.2 HDMI Out connection

You can mirror the Raymarine® display's screen and output its audio to
an external third-party High Definition (HD) display, such as an HD TV or
computer monitor.
Your Raymarine® display can be connected via the separately available
Micro HDMI (Type D) to HDMI accessory cable (part number A80723). This
cable connects to the Micro HDMI Out connector located on the rear of
the Raymarine® display, and to an available HDMI input on the third-party
display. The Raymarine® display screen can then be viewed by switching
the third-party display's input source to the HDMI input that you connected
your Raymarine® display to.
Alternatively, you can connect the Raymarine® display's HDMI out connection
to a sound system that has an HDMI input connection. Depending on the
connected device, this may support audio only.
The supported screen resolutions for the Raymarine® display's HDMI output
are:
• 720 x 480p @ 60 Hz
• 720 x 576p @ 50 Hz
• 1280 x 720p @ 50 Hz / 60 Hz
• 1920 x 1080p @ 50 Hz / 60 Hz
Note:
• The maximum supported HDMI cable length is 20 m (65.6 ft). If longer
cable runs are needed, an HDMI extender (signal amplifier) is also
required, available separately from suitable retailers.
• Ensure that the HDMI cable's locking collar is used to secure the cable
to the Raymarine® display.
73