Raymarine AXIOM 2 PRO Installation Instructions Manual page 120

5. Backbone terminator (part number: A06031). Terminators must be fitted
to both ends of the SeaTalkng backbone.
6. Spur blanking plug (part number: A06032). Used to cover unused spur
connections in 5–way blocks, T-piece connectors, or the SeaTalk to
SeaTalkng converter.
7. Elbow (right angled) spur connector (part number: A06077). Used in
confined spaces where a straight spur cable will not fit.
SeaTalkng ® adaptors and adaptor cables
SeaTalkng adaptor cables are used to connect devices designed for different
CAN bus backbones (e.g.: SeaTalk or DeviceNet) to the SeaTalkng backbone.
1. SeaTalk (3 pin) to SeaTalkng converter cable 1 m (3.3 ft) (part number:
A22164 / A06073). Can be used to connect a SeaTalk device to a
SeaTalkng backbone via the SeaTalk to SeaTalkng converter, or to
connect a SeaTalkng product directly to a SeaTalk network.
2. SeaTalk (3 pin) to SeaTalkng adaptor cable 0.4 m (1.3 ft) (part number:
A06047). Can be used to connect a SeaTalk device to a SeaTalkng
backbone via the SeaTalk to SeaTalkng converter, or to connect a
SeaTalkng product directly to a SeaTalk network.
3. SeaTalk2 (5 pin) to SeaTalkng adaptor cable 0.4 m (1.3 ft) (part number:
A06048). Used to connect SeaTalk2 devices or networks to a SeaTalkng
backbone.
4. SeaTalkng to DeviceNet (female) adaptor cables connect NMEA 2000
devices that use a DeviceNet connector to the SeaTalkng backbone, or
120
connects SeaTalkng devices to an NMEA 2000 network. The following
cables are available:
• SeaTalkng to DeviceNet (female) adaptor cable 0.4 m (1.3 ft) (part
number: A06045).
• SeaTalkng to DeviceNet (female) adaptor cable 1 m (3.3 ft) (part
number: A06075).
5. SeaTalkng to DeviceNet (male) adaptor cables. Connect NMEA 2000
devices that use a DeviceNet connector to the SeaTalkng backbone, or
connect SeaTalkng devices to an NMEA 2000 network. The following
cables are available:
• SeaTalkng to DeviceNet (male) adaptor cable 0.1 m (0.33 ft) (part
number: A06078).
• SeaTalkng to DeviceNet (male) adaptor cable 0.4 m (1.3 ft) (part
number: A06074).
• SeaTalkng to DeviceNet (male) adaptor cable 1 m (3.3 ft) (part number:
A06076).
• SeaTalkng to DeviceNet (male) adaptor cable 1.5 m (4.92 ft) (part
number: A06046).
6. NMEA 0183 VHF stripped-end (2 wire) to SeaTalkng adapter cable 1 m
(3.3 ft) (part number: A06071). Used to connect an NMEA 0183 VHF
radio to the SeaTalkng backbone via the NMEA 0183 VHF to SeaTalkng
converter.
7. SeaTalkng (male) to DeviceNet (female) adaptor (A06082).
8. SeaTalkng (female) to DeviceNet (male) adaptor (A06083).
9. SeaTalkng (male) to DeviceNet (female) elbow (right angled) adaptor
(A06084).
10. DeviceNet (female) to stripped-end adaptor cable (0.4 m (1.3 ft) (part
number: E05026).
11. DeviceNet (male) to stripped-end adaptor cable (0.4 m (1.3 ft) (part
number: E05027).