Emergency Release Pull Cord Operation; Personal Injury Warnings - True GDM-HST02-HC-TSL01 Installation Manual

Table of Contents

Advertisement

Important Safety Information (cont.)

Emergency Release Pull Cord Operation

Risk of Entrapment.
The emergency release pull cord is located near the Emergency Release sticker on the inner sidewall of the appliance.
`
See figs. 1 and 2.
Fig. 1. Emergency release identification sticker. Found
on inner sidewall of the appliance.

Personal Injury Warnings

Only qualified technicians should install and service the appliance. For assistance finding a qualified technician, please visit our Service
Company Locator at truemfg.com/support/service-locator. TRUE is solely the appliance manufacturer and is not responsible for
installation.
DO NOT
allow children to play with or in the appliance. Child entrapment or personal injury can occur.
DO NOT
store or use the following in the vicinity of this or any other appliance:
• Gasoline or other flammable vapors and liquids
• Combustible or explosive substances, such as aerosol cans with a flammable propellant
• Other volatile or flammable substances
Contact TRUE Manufacturing to locate refrigerant lines and electrical wiring
or exterior walls. Failure to do so could result in damage, personal injury, or death.
Page 6 of 48
In case of emergency, the door may be unlocked and opened from the inside with the pull cord.
Fig. 2. Emergency release cord location.
GDM-HST02
WARNING!
DANGER!
12/4/2023
before drilling, cutting or puncturing interior
P#840669
truemfg.com
TEC_TM_158 | REV. B | EN

Advertisement

Table of Contents
loading

This manual is also suitable for:

Gdm-23-hst02-hc-tsl01Gdm-26-hst02-hc-tsl01

Table of Contents