Table of Contents
Advertisement
Electronic Temperature Control (cont.)
Enable the Product Loading & Servicing Delay
The Product Loading & Servicing Delay extends the 30-minute
window before the health safety timer activates. This feature
prevents the door from locking when loading or servicing the
appliance. It is enabled automatically upon powering the unit
and following defrost events.
• Total Freezer Delay: 105 minutes
• Total Refrigerator Delay: 60 minutes
The Product Loading & Servicing Delay can also be manually
initiated with the instructions below.
1. Press info
to show hSt.
2. Press and hold info until the display shows 00.
DO NOT RELEASE THE BUTTON!
3. While holding info, press the up arrow until the display
shows 01.
4. Release all buttons and wait for the control display to
alternate between hSt and dLY.
Page 30 of 48
GDM-HST02
L A E C O N T R O L L E G E N D
Test the Health Safety Lock
The Health Safety Lock locks the appliance door when the
electronic control detects the appliance temperature has been
above a preset temperature for 30 minutes.
1. Press info
2. Press and hold info until the display shows 00.
3. While holding info, press the up arrow until the display
4. Release all buttons. If operational, the Health Safety Lock
5. Clear the Health Safety Alarm. See "Clear the Health Safety
12/4/2023
Compressor Running
Evaporator Fan Running
Appliance in Defrost
Activation of 2
nd
Parameter Set
Alarm
to show hSt.
DO NOT RELEASE THE BUTTON!
shows 23.
will activate.
Alarm or Product Loading & Servicing Delay".
P#840669
truemfg.com
Info/Set Point
Manual Activation/
Up Arrow
Manual Defrost/
Stand-By/
Down Arrow
Cancel
TEC_TM_158 | REV. B | EN
Advertisement
Table of Contents
