Table of Contents
Advertisement
TROUBLESHOOTING
No rear sound is produced.
Remote control does not work.
¢ The SURROUND MODE switch is set incorrectly.
* The REAR LEVEL is turned down.
© Speaker connecting wires are disconnected from
REAR SPEAKERS terminais.
* Batteries are dead or no batteries in remote
control unit.
© Poor angle or too great a distance from the
remote sensor window.
* There is an obstacle between you and the
remote sensor window.
¢ A fluorescent light is shining on the remote
sensor window.
* CONTROL MODE is not set for the component
you want to operate.
¢ You are pressing a button that does not
transmit a signal.
Abnormal functioning of this unit may be caused by lightning, static
electricity, or other external interference. To restore normal operation,
turn the power off and then on again, or unplug the AC power cord
and then plug it in again.
42
<ARB1421>
© Set correctly.
* Adjust the rear level with the remote control
unit's REAR LEVEL buttons.
* Connect wires to terminals securely.
¢ Insert new batteries.
¢ Use within seven meters and within a 30 degree
angle of the remote sensor window.
¢ Change your position or move the obstacle.
* Move so fluorescent light does not shine directly
on amplifier front panel remote sensor window.
© Select the correct CONTROL MODE button and
press.
¢ Refer once more to page 31, and press a button
that transmit a signal.
Advertisement
Table of Contents
