Ta Ec Peter Sro Het - Pioneer VSX-D6025 Operating Instructions Manual

REAR PANEL FACILITIES
* Illustration shows VSX-D702S U.S. and Canadian models.
@ @ @
Looe
ANTENNA
O® ©
@ FM/AM ANTENNA terminals
Use these antenna terminals for reception of normal FM and AM
broadcasts.
@ TAPE 2 MONITOR jacks
Connect the second cassette deck to these jacks.
Connecting for Recording
The tape recording jack (REC) on the cassette deck should be connected
to the REC side of the TAPE 2 MONITOR jack on the receiver with a
pin plug connecting cord.
Connecting for Playback
Connect the TAPE PLAY jack on the cassette deck to the PLAY side
of the TAPE 2 MONITOR jack on the receiver with a pin plug connecting
cord.
@ TAPE 1/DAT jacks
Use these to connect the cassette deck or DAT (digital audio tape) deck.
Connecting for Recording
The tape recording jack (REC) on the cassette deck or DAT should be
connected to the REC side of the TAPE 1/DAT jack on the receiver with
a pin plug connecting cord.
Connecting for Playback
Connect the PLAY jack on the cassette deck or DAT to the PLAY side
of the TAPE 1/DAT jack on the receiver with a pin plug connecting cord.
@ VCR 2 jacks
[VIDEO OUT]
When copying program material from the video component
connected to the VCR 1, TV, VIDEO (front) or LD jacks, connect to the
VIDEO INPUT jacks of the VCR used for recording.
[AUDIO OUT (L, R)]
When copying program materials from the video component
connected to the VCR 1, TV, VIDEO (front) or LD jacks, or when
recording music from an audio component source, connect to the
AUDIO INPUT jacks of the VCR used for recording.
UT:
® © ®©O® ® @
[VIDEO IN]
When monitoring the video image from a VCR used for copying,
connect its VIDEO OUTPUT jacks here.
[AUDIO IN (L, R)]
When monitoring the audio channel from a VCR used for copying,
connect its AUDIO OUTPUT jacks here.
® VIDEO OUT (TV MONITOR) jack
Connect to monitor TV or to TV sets with video input terminals fer
watching program materials from a VCR 1, 2, TV, VIDEO (front) or LD
player connected to this unit.
© VCR 1 jacks
[VIDEO OUT]
When copying program material from the video component
connected to the VCR 2, TV, VIDEO (front) or LD jacks, connect to the
VIDEO INPUT jacks of the VCR used for recording.
[AUDIO OUT (L, R)]
When copying program material from the video component
connected to the VCR 2, TV, VIDEO (front) or LD jacks, or when
recording music from an audio component source, connect to the
AUDIO INPUT jacks of the VCR used for recording.
[VIDEO IN]
When monitoring the video image from a VCR used for playing,
connect its VIDEO OUTPUT jacks here.
[AUDIO IN (L, R)]
When monitoring the audio channel from a VCR used for playing,
connect its AUDIO OUTPUT jacks here.
15
<ARB1421>