Garmin G5000 Airplane Flight Manual Supplement page 146

Model 560XL
The following tables list the available AFCS vertical and lateral modes with their corresponding controls
and annunciations. The mode reference is displayed next to the active mode annunciation for Altitude
Hold, Vertical Speed, and Flight Level Change modes. The NOSE UP/DN Wheel can be used to change
the vertical mode reference while operating under Pitch Hold, Vertical Speed, or Flight Level Change
Mode. Increments of change and acceptable ranges of values for each of these references using the
NOSE UP/DN Wheel are also listed in the table.
Vertical Mode Control
Pitch Hold (default)
Selected Altitude
Capture
Altitude Hold ALT Key
Vertical Speed VS Key
Flight Level
Change, IAS Hold
Flight Level FLC Key
Change, Mach
Hold
Vertical Descent
Path Tracking
VNV Target
Altitude Capture
Glidepath
Glideslope
Takeoff (on
ground)
Switch
Go Around (in air)
* ALTS arms automatically when PIT, VS, FLC, TO, or GA is active, and when PATH is active if
the Selected Altitude is to be captured instead of the VNAV Target Altitude.
** ALTV arms automatically if the VNAV Target Altitude is to be captured instead of the Selected
Altitude.
Textron Aviation Citation 560XL
A-10
Table A-1, AFCS Vertical Modes
Annunciation
PIT
* ALTS
ALT nnnnn FT
VS nnnn FPM
FLC nnn KT
FLC M 0.nn
VNAV
PATH
Key
** ALTV
APPR GP
Key GS
GA TO
GA
Appendix – Systems Description
Reference Range
20° Nose Up
20° Nose Down
-6000 to +6000 FPM
Maximum of 305 KT
Maximum of M 0.75
Reference Change
Increment
0.5°
100 FPM
1 KT
M 0.01
190-02313-03 Rev. 8