Adjustments With Rs-232C - Toshiba TLP680U Owner's Manual

Others

Adjustments with RS-232C

Conditioning of the Projection Unit can also be
done by a computer via the RS-232C, as well
as by the remote control.
7
8
6
5
3
4
2 1
Mini DIN 8-pin
(Main Unit)
Interface format
1 Communication RS-232C
method 9600 bps, No parity, Data length: 8 bit,
Stop bit: 1 bit
2 Communication STX (02h) Command (3Byte) ETX (03h)
format One command only can be used in one
communication.
3 Data format Command shall be composed of
alphanumeric characters of ASCII
description. Use only capital letters.
4 Return value Acknowledge ACK (06h)
Not Acknowledge NAK (15h)
Note
When commands are transmitted serially, keep more than 100 ms
intervals between the commands.
Pin No. Signal Meaning
1 RXD Receiving data
2 CTS Consent to send
3 DSR Data set ready
4 GND Signal ground
5 RTS Request to send
6 N.C No connection
7 TXD Sending data
8 N.C No connection
Command list
Classification Command
NORMAL POF
NORMAL PON
NORMAL MOF
NORMAL MON
NORMAL AON
NORMAL DOF
NORMAL DON
NORMAL FOF
NORMAL FON
NORMAL IN1
NORMAL IN2
NORMAL IN3
RESIZE RS0
RESIZE RS1
RESIZE RS2
RESIZE RS3
RESIZE RS4
CAMERA CW0
CAMERA CW1
CAMERA CS0
CAMERA CS1
CAMERA CO0
CAMERA CO1
ADJUST ARS
ADJUST ARG
CONTENTS
Meaning
Power OFF
Power ON
Video audio mute OFF
Video audio mute ON
Audio mute ON
Status display OFF
Status display ON
Freeze OFF
Freeze ON
Input (RGB)
Input (Video)
Input (Camera)
Resize reset
Resize 1
Resize 2
Resize 3
Resize 4
Automatic W/B OFF
Automatic W/B ON
Text mode OFF
Text mode ON
Overlaying mode OFF
Overlaying mode ON
Adjustment value reset
Adjustment value increase
(Continued)
49