Assembling The Kit - Toro 147-6346 Installation Instructions Manual

Assembling the Kit

Assemble the kit as shown in
hinge bracket must pivot freely.
Important:
Secure the bottom bracket plate to the machine before installing the hinge bracket.
1. Hinge bracket
2. Nut (1/4 inch)
3. Carriage bolt (5/16 x 7/8
inch)
4. Top bracket
Figure 1. Do not overtighten the bolt (1/4 x 4-1/4 inches) and nut (1/4 inch); the
5. Main bracket
6. Knob
7. Top bracket plate
8. Nut (1/4 inch)
Figure 1
9. Carriage bolt (1/4 x 1 inch) 13. Bolt (1/4 x 4-1/4 inches)
10. Nut (5/16 inch)
11. Bottom bracket plate
12. Bolt (5/16 x 3 inches)
3
g439098