Table of Contents
Advertisement
Mounting the Kit to the Side of the Engine Guard
WARNING
The engine can become very hot. Touching a hot engine can cause severe burns.
Allow the engine to cool completely before service or making repairs around the engine area.
1.
Secure the mount assembly to the side rear guard using 1 carriage bolt (1/4 x 1 inch) and 1 nut (1/4
inch) as shown in
2.
Secure the bottom of the main bracket to the engine guard using 2 bolts (5/16 x 3 inches) and 2 nuts (5/16
inch) as shown in
Note:
Remove the 2 bolts securing the lower side rear guard to make room for the mounting bracket.
1.
Bolt (5/16 x 3 inches) and nut (5/16 inch)
Figure 3
or
Figure
4.
Figure 3
or
Figure
4.
Mounting the kit to the left side of the engine guard
Figure 3
2. Carriage bolt (1/4 x 1 inch) and nut (1/4 inch)
5
g437354
Advertisement
Table of Contents
