Table of Contents
Advertisement
Timer-Activated Recording
The timer recording function lets you preset your VCR to record up to six programs
within a one-month period. Perform this procedure using the Remote Commander
and set each item on the TIMER/SET CHECK.
Before You Begin
¢ Make sure the time and date clock is set correctly (see "Setting the Time and
Date' on page 18).
« Make sure the cassette is long enough to record all the programs.
¢ Make sure the safety tab of the cassette has not been slid out. If you insert a
cassette with the safety tab visible in red (closed) and press TIMER REC
(ON/OFF), the cassette automatically ejects from the VCR.
e Use A and ¥ to move the cursor (Pm).
¢ Use < and
to select items.
¢ To quit setting in the middle of the procedures, press MENU.
Setting the Timer
Example:
Record a program broadcast on channel 26 from 9:00 pm to 10:55 pm on Friday.
July 10 in LP mode.
1 Press MENU.
The main MENU appears.
2 Press & or ¥ to move the cursor (®) to TIMER
SET/CHECK.
3 Press EXECUTE.
The TIMER SET/CHECK display appears on the screen.
If the clock is not set properly, reset the clock, referring to
"Setting the Time and Date" on page 18.
4 PressP.
The current date appears blinking under "DATE".
5 Press A to set the month and date to 7/10/FRI.
The day of the week is automatically set.
Timer-Activated Recording
Advertisement
Table of Contents
