Table of Contents
Advertisement
Connecting Video Equipment with the
LANC connector
Notes
* When connecting the VCRs, do not
connect both LINE IN and LINE OUT
jacks on your VCRs simultaneously.
Doing so may cause a humming
noise.
© If your playback VCR is a stereo unit,
make connections using the VCM-
910MS/920MS cable (not supplied).
¢ If another VCR has both the LANC
connector and the CONTROL S
connector, use the LANC connector.
Do not make the LANC and
CONTROL S connections
simultaneously.
About the @ (LANC)
LANC stands for Local Application
Control System.
The LANC connector is used for
controlling the tape transport of
video equipment and peripherals
connected to it. This connector
has the same function as the
connectors indicated as
CONTROL L or REMOTE.
50
| Synchronized Editing
Advertisement
Table of Contents
