Table of Contents
Advertisement
VCR Setup (Simple Cable)
1 Set the RF UNIT on the VCR's rear panel to CH3 or
CH4.
if you made A/V connections, skip this adjustment.
CH3 B
CH4 1
Set to whichever channel is not used in your area.
If both are used, pick either channel.
Details are on page 57.
2 Set NORMAL/CATV to CATV.
Press MENU.
Select TUNER PRESET.
Details are on page 19.
3 Preprogram the channels into the VCR.
Press MENU.
Select TUNER PRESET.
Select AUTO PRESET,
then press EXECUTE.
Details are on page 19.
Clock Setting
1 Press MENU.
2 Press 4 or ¥ to move the cursor (») to CLOCK SET.
3 Press EXECUTE.
4 Press A or ¥ to set the flashing position, press < or
» to move the flashing position.
CA0CK SET
Transe
Sat spe
5 Press EXECUTE to start the clock.
Details are on page 18.
To Watch TV
1 Turn your VCR off, or press the VCR's TV/VTR button
on the Remote Commander until the VTR indicator in
the display window goes off.
2 Select the channel with our cable (if you have one), or
directly tune with your TV (if you don't)
To Watch the VCR
1a_
If you didn't use the A/V input:
¢ Turn ON the cable box.
¢ Select ch 3 or 4 on the cable box (whichever you set
on the back of the VCR).
¢ Select the output channel of the cable box (usually 2,
3 or 4) on your TV.
1b
If you made the A/V connections on page 7:
Set your TV to the A/V input.
2 Insert a cassette and press » PLAY.
Details are on pages 24.
To Record a Program Using the Timer
1 Insert a cassette.
Press MENU.
Select TIMER SET/CHECK.
Press EXECUTE.
Set DATE, ON time, OFFtime , CHannel and tape
recording speed.
Press EXECUTE and then TIMER REC (ON/OFF).
2
3
4
5
Details are on pages 28 and 29.
Hookups and Getting Started
11
Advertisement
Table of Contents
